As we all know, the hydraulic system of the concrete mixing plant is very important. If the hydraulic system is overheated, it will cause great harm to the concrete mixing plant. Therefore, when the hydraulic system of the concrete mixing plant overheats, it must be dealt with in time. The cause of fever, the cause of overheating of the hydraulic system may be as follows:

It is unreasonable to use concrete mixing and drag pump oil. Oil is the source of power and an indispensable fuel. Although each type of oil can make the engine work, incorrect oil can cause damage to the hydraulic system. When the gram is low, it is not obvious, but when the temperature increases, it may cause the viscosity of the oil to decrease and the leakage to increase. The solution to this problem is simple, just use the appropriate hydraulic oil according to the instructions.

The fuel tank is unreasonable. The fuel tank is an important part of the heat dissipation of the hydraulic system. If the material or size and location of the fuel tank are unreasonable, it may cause poor heat dissipation and the system temperature will increase. According to the data, the volume of the fuel tank must be at least twice the flow rate of the system to ensure good heat dissipation. For the requirements of the fuel tank structure, the oil inlet and the oil outlet should be further separated, which is beneficial to the impurities in the intermediate precipitated oil. Place a shim in the middle for better results.