During the use of the concrete mixing plant equipment, due to the wear and corrosion of parts, reduction or deterioration of lubricants, loosening or displacement of fasteners, etc., causing the reduction of mechanical power, economy and safety and reliability, so this It is required that before the equipment reaches the limit wear or failure, corresponding preventive measures are taken in time to reduce the wear rate of parts and eliminate the hidden danger of failure, so as to ensure the normal operation of the concrete mixing plant and extend the service life of the equipment. Why concrete mixing plants need regular maintenance. The following introduces the maintenance measures for the equipment of the concrete mixing plant:

1.Clean

Cleaning is required to ensure that all parts of the concrete mixing plant are free of sludge and concrete agglomerates, especially the cleanness of the surface of the control cabinet and the reduction box to ensure the normal heat dissipation of the machine.

2. Fastening

Fastening is to check the fastening of the connecting parts of the concrete mixing plant in time. The vibration generated during the mechanical operation is easy to loosen the connection parts. If it is not fastened in time, it may not only cause oil leakage, air leakage, electricity leakage, etc., but also loose bolts in some key parts, and it will also change the force distribution of the original design components. The light part will cause the component to deform, and the heavy part will cause the part to break and separate, which will cause the operation failure and cause a mechanical accident.

3.Adjustment

Adjustment is to timely check and adjust the relative relationships and working parameters of many components of the concrete mixing plant machinery to ensure the normal operation of the machinery. In particular, the flexibility and reliability of key components must be properly adjusted to prevent accidents.

4.Lubrication

Lubrication is to regularly fill or replace lubricating oil according to the specified requirements to maintain good lubrication between the moving parts of the machine, reduce the wear of the parts, and ensure the normal operation of the machine.

5.Protection

Protection is to protect the concrete mixing plant from moisture, rust, and acid, and prevent corrosion of mechanical parts and electrical equipment. In particular, the exterior of machinery must be repainted or coated with anticorrosive materials such as grease.

A variety of equipment failures and mechanical problems will inevitably occur during the long-term operation of the concrete mixing plant. The relevant management personnel should strengthen the regular inspection and maintenance of the equipment of the concrete mixing plant to ensure the stability of the equipment to the greatest extent. Avoid equipment failure. In the actual operation, if equipment failure occurs, the relevant operators should deal with it in a targeted manner, find the cause of the problem in a timely and proactive manner, and deal with it to ensure the smooth operation of the concrete mixing plant.