1.Smooth inspection of the host

When the mixer is working, you can check whether the smooth grease pump wiper is working normally.

2. Query the value of smooth grease pump pressure gauge

Under normal conditions, the working pressure is 10, if the pressure is lower than 10, it may be an infarct of the smooth grease pump core. If the pressure is higher than 60, it may be an infarct of the distribution valve or an infarct of the pipeline behind.

3.There is a spare grease nipple on each shaft head

Press the top bead of the butter mouth with your fingernails.If there is smooth grease, it proves that the shaft head is smooth and in place, otherwise it proves that the shaft head is not smooth.

4.In the state of automatic production

The hand-in handle of the discharge door of the mixing host should be in the retracted position and the ball valve is in the neutral position. The two manual automatic replacement screw plugs should be tightened to prevent premature damage to the hand oil pump.

5.The mixing host gearbox should pay attention to timely refueling and oil change

Check if the gear oil is satisfactory, and ensure that the oil level of its oil indicator can be checked.

6. check the gearbox for signs of oil leakage

The easy-to-leak areas of the reducer of the bidding machine are the input and output shaft seals and the oil temperature sensor.

7.The stirring shaft and the stirring blade should be cleaned in each working cycle to prevent material buildup and shaft holding.

The above is daily maintenance instruction for concrete mixing plant, if you want to know more about concrete plant, feel free to contact us. Our service team will reply you as soon as we can.

Email: info@sinoroader.com

WhatsApp/Wechat:+86 18137858347